Elementary Blacksmithing
From Brass Goggles
Revision as of 20:48, 23 July 2008
This section will be a guide to the very basics of Blacksmithing.
==
Materials ==
There are six basic tools that every blacksmith should have available, although two might be considered optional by the more burn resistant among us. They are: a forge, hammer, anvil, glove (singular, we'll get to that later), goggles, and tongs.
Forge
The word forge refers to both the brazier in which you heat your iron and the smith's work area in general. It is safe to assume for the remainder of this article that only the former definition will be used.
A forge can be either coal or propane/oxygen burning, depending on the space available and zoning requirements where you live (suburban fire depots tend to bristle at the clouds of yellow-ish black smoke a coal fire forge discharges.) A propane forge will likely be smaller, cheaper to operate, and not require the storage of solid fuel (coal usually being sold by the half-ton.) A coal forge will allow for work on large or oddly shaped pieces and will burn hotter.
Hammer
Blacksmiths use a wide variety of specialty hammers, but the most indispensable is the rounding hammer.
A good entry-level hammer can be bought here: http://www.centaurforge.com/prodinfo.asp?number=285
Anvil
A good quality anvil will have a flat, smooth top without any bumps or dings which may leave an impression in your work. Note, always make sure you anvil is securely anchored to it's stand, and the stand securely anchored to the ground. Anvil's are heavy and can easily cause a narrow stand to fall over if bumped into or tripped over.
Glove
A sturdy heat-resistant glove is good for your non-dominant hand. A glove on your hammer hand will just cause the hammer to slip, making it harder to aim your blows and tiring out your wrist.
Goggles
Sparks and fire scale fly with each hammer blow, safety goggles are a necessity. (Note, aviator goggles, welding goggles, etc. can restrict your peripheral vision. Since smithing is a task that requires you to be aware of your surroundings (which will often include explosive, hot, or sharp objects in close quarters,) you will need your full field of vision.)
Tongs
An alternative to a glove, a pair of proper tongs can be used to hold the metal. Since they will never spend much time in the forge, they will not get hot nearly as quickly, even so, you should remember to quench them often.
